Water System

Pressure Regulators

pressure regulatorsOtherwise known as a pressure regulating valve or pressure reducing valve, this large, cone-shaped brass valve is located on your incoming main water line, most of the time inside the home. You may never have seen this valve if you have a crawlspace or a finished basement, but rest assured, it’s there (or should be). The function of a PRV is to regulate the water pressure inside your home’s plumbing between 55 and 70 psi. The water pressure on your main waterline before it reaches your home, and subsequently your PRV, is around 130-160 psi. This is far too high for your faucets, toilet valves, and other plumbing fixtures to handle. This amount of pressure would damage the components in these items, causing faulty operation and leaks. So in order to keep the water pressure at a safe working level, a PRV is installed to reduce and regulate the pressure at a consistent range, extending the life of your plumbing system. They accomplish this by using an internally mounted spring and diaphragm assembly that controls the pressure by channeling the water through multiple chambers. Imagine the muffler on your car…only a little more complex.

Like any other mechanical valve, PRV’s have a relatively limited lifespan. Their total working time is dependent on several things, including street pressure, usage, and overall quality, but the average lifespan of one of these valves ranges from 7-12 years, with some exceptions. PRV’s can be easily damaged, however, and often you will notice pressure issues in your home after only a few years. Small bits of debris can find their way into waterlines, damaging or clogging the mechanism that controls pressure. The internal diaphragm, being made of a softer material, can be torn if debris enters the valve. This event will often cause a humming or banging sound coming from your water pipes, known as water hammer. High quality valves are less prone, but still susceptible to these problems. Some brands and models have a longer lifespan than others, and we only install the highest quality, proven valves in your home. These valves range in size from 3/4″ to 1 1/2″ for residential applications, and even larger for commercial properties.

Twin Plumbing installs and services all types of PRV’s. So when you notice a sudden increase or decrease in your water pressure, strange sounds when you use faucets or flush a toilet, or if it’s simply been a while since your last replacement, have your PRV replaced. It will save you costly repairs elsewhere in your home and keep your plumbing system in check.

858-518-0242

By |2026-09-10T06:15:51+00:00September 1st, 2015|Water System|

Water Conditioning

Twin Plumbing’s comprehensive Water Conditioning analysis will give you all the information you need to help you determine if your water is safe and just how healthy it is for you and your family. We provide:

  • softeners & household filters
  • replacement filters & cartridges
  • complete drinking water systems

Reducing the hardness of your water will leave you feeling more refreshed than ever after a shower and your towels feeling softer than ever! You will taste the difference in your drinking water!

See the clarity, feel the purity, and taste the freshness! Start enjoying clean, fresh water in your home every day! GUARANTEED!

Some common water conditioning issues include:

CHLORINE
City water contains chlorine. While chlorine for the most part will not hurt you, it smells and tastes bad. In addition, it dries out hair and skin leaving you itchy and uncomfortable.

WATER ODOR
The presence of hydrogen sulfide in water results in a fowl smelling water similar to that of a rotten egg. In addition, musty, earthy or fishy tasting or smelling water is the result of algae, molds and bacteria. While it is mostly harmless, smelly water is virtually useless for drinking, cooking and cleaning.

HARD WATER
Hard water causes soap scum to form in tubs and showers and results in spots appearing on faucets and fixtures. Hard water is also hard on appliances by creating scale build up inside pipes. It can result in very costly repairs.

METALLIC TASTE OR SMELL
Metallic tasting water is usually the result of elevated levels of actual metals in your water like iron and manganese. They not only taste bad but they can be bad for you!

CLOUDY WATER
While sometimes the cloudiness can be confused with harmless air bubbles, some cloudiness can be a reason for concern. In drinking water, the cloudier the water appears the higher the risk that your water contains impurities in the form of suspended solids. Suspended solids interfere with water disinfection with chlorine because the particles act as shields for the virus and bacteria.

FEAR OF THE UNKNOWN
What you can’t see can hurt you. Bacteria’s, viruses, cryptosporidium, giardia lamblia, lead, mercury and many other very harmful impurities can be found in tap water. These elements can cause unspeakable illnesses and even adversely affect the young and elderly where immune systems are less developed or compromised.

water-filters

Twin Plumbing provides a variety of water conditioning solutions

Studies have found that your clothing can wear out up to 30 times faster if you have hard water; hard water can also lead to your skin always feeling itchy and dry. But, Twin Plumbing Rancho Bernardo Plumbing can help by installing a water softener or drinking water system.

The proper selection of an ion exchange water conditioner can greatly reduce or eliminate the problems caused by the presence of hardness and other unwanted minerals from water supplies.

Water that contains dissolved calcium, magnesium, iron and manganese is commonly referred to as “hard” because these metals can combine with other compounds to leave hard scales or stains on the surfaces they touch, as well as interfering with the effectiveness of soap and other cleaning products.

Water may also contain other dissolved unwanted minerals such as lead, nitrates, aesthetic chlorine, and aluminum, organics that produce off tastes and odors, and other impurities.

Call Twin Plumbing for softer water today!

858-518-0242

 

By |2026-09-09T08:26:57+00:00September 1st, 2015|Water System|

Backflow Certification

Backflow Can be Hazardous!

backflow anatomy

Backflow prevention programs are required to protect safe drinking water. “Safe drinking water” is federally-mandated and regulated by the Environmental Protection Agency.

Although millions of Americans receive high quality drinking water every day from their public water systems, drinking water safety cannot be taken for granted. There are a number of threats to drinking water: improperly disposed of chemicals; animal wastes; pesticides; human wastes; wastes injected deep underground; and naturally-occurring substances can all contaminate drinking water. Likewise, drinking water that is not properly treated or disinfected, or which travels through an improperly maintained distribution system, may also pose a health risk.

At Twin Plumbing Poway, we’re experts at ensuring your backflow prevention system is operating to standard and that your drinking water is safe.

Frequently Asked Questions About Backflow

What is backflow?
The reverse flow of your water supply.

Does backflow make my sewers back up?
No, it is the reverse flow of your water supply or your drinking water.

What is backflow prevention?
It is the prevention of water from flowing in reverse.

Why does my backflow preventer need to be tested?
It needs to be tested annually to make sure that it is working properly and not allowing potential pollutants or contaminants to flow back into the main water supply.

Is my water safe to drink?
1. If your water comes from a municipality, your water is probably safe, but we would recommend a filtration system to remove some chemicals that are added to your water. This should improve the taste and odor of your water, as well as the appearance of your ice.
2. If your water comes from a private well, it probably is safe, but we highly recommend that the water be tested. Then, a water filtration system will be recommended. Again, this will improve the overall appearance, taste and odor of your water.

SCHEDULE YOUR CERTIFICATION NOW

If the annual certification of the backflow located at your water meter is due, please feel free to call our office to schedule the inspection of your backflow.

Our fee for each certification vary by location and are per test. If you have any questions please contact one of our customer care representatives at (858) 518-0242. We appreciate your business!

If we repair your backflow and replace internal parts, we offer a six (6) month warranty for these internal parts, should the device fail.

(858) 518-0242

By |2026-09-10T06:20:29+00:00August 15th, 2015|Water System|
Go to Top